NOTE! This guide has been completely updated! Go to the newer guide by clicking HERE!
Are you trying to activate your iPhone 2G, 3G, 3GS, or 4 without a sim card? Well you’re in luck; you can use redsn0w to accomplish just that on any version from 3.X.X -4.X.X. Currently, iOS 5 is not supported with hacktivation. Just follow the step by step tutorial below to get your iPhone up and running. Alternatively, you can use any active/inactive sim card to activate the iPhone as long as it is the carrier the phone was originally locked to (in the USA, its AT&T).
Download Links:
Tinyumbrella (Windows)
Redsn0w (Find Your Corresponding Version)
Firmware Files – (Find Your Corresponding Version)
It worked, thanks
how did you guys get it to work what am I doing wrong?
thanks.. it works… 🙂
how i do it
Are you a girl?
finally my iphone jail brokened . but it is not getting network ..help
i am also getting same problem. no service mode
………………………. please help
Having issues with getting redsnow to browse and open up the firmware. I have downloaded all three versions I have and i phone 3 gs installed firmware 5.0.1. Can yo help?
me too, and dont know what to do/!
Number one, make sure you have the right firmware. Don’t automatically assume that it’s 5.0.1 firmware just because it’s the latest. In example: I’m going to download the 4.2.1 firmware for my iPhone 3G because that is the firmware it is currently running.
Number two, I would advise that when you download the proper firmware for your iPhone, that the firmware be saved to your Desktop..That way it’ll be easier to find.
Number three, make sure you have the proper version of Redsn0w. If you went to the link provided at the end of this article, you would have saw there’s different versions of Redsn0w available. I would suggest using Google to figure out which Redsn0w you should use for the version of your iPhone.
Number four, if you did everything above that I recommended/suggested you’d do, then everything should be working perfectly and you should be back on track to unlocking/jailbreaking.
Thanks for your time!
hey ashlee will u please help me i have the excat same phone as u so pease this is my first time and will u helppp thanks
this has now happened to me
thanks buddy. i really appreciate your help. u r really a angel for me.
hi,
how to unlock after doing…..i am sucessful up to hactivation…but later how to unlocke them for 5.1.1 and 4.12,01
Please Help!!
I have accidentally u pgraded my iphone4 to 5.0.1 and it was an locked phone. Now I got struck in a where it is asking for activation. Please help as you described in your video I am not able to find the table to find my version of redsn0w
please help
how i do it i can t please someone help me
Followed your tutorial uploaded the tools needed to jail break phone, worked a treat!
Having same problems as Darrius. Also a 3GS version 5.0.1 i really wanna fix my iphone. does anyone know what to do? is there another type of firmware i could try?
i have iphone4 and its 4.3.5 . i cant find redsnow .
help?
ditto iphone 4 5.0.1 cant get past activation! Someone must know how to fix it???? 🙁
success! 3gs/5.0.1 – using redsnow 0.9.10b3
how’d you find the redsn0w version.? Im lookin for it and cant find t 🙁
I cannot find my firmware ipsw from redsnow…
Will this hack of the original IPhone allow you to use the phone on boostmobile?
What an idea of hacking about Apple.
I have Macbook pro what I have to do with it? no redsnow and no tinyumbrela
Apple rock
Why am I not seeing “connected devices” on tiny umbrella??
i cant open my firmware on redsnow help
me either
Very helpful stuff. Did not try this yet Would love to try this exceptional things.Would like to share also with another and suggest to another to take little visit in this impressive blog post.
Hi, I followed your Youtube steps, when it came to my Redsnow browsing for the firmware, it is not able to find it. I did download my firmware and unzipped the file. What am I doing wrong?
Thanks,
Victor
dude i accidentally upgraded to ios 5.o……. im on a 3g iphone……..i cant get past the activatrion screen
please help me im on 3g i need activation i dont no wat link to click on
does it actually work for iphone4? My phone is all new, and it won’t activate without the sim..
disregard this comment
Does this work for iphone 4? My phone is all new, when i turn it on it ask for the language and country stuff and then it won’t let me go to home screen without “sim card”
i want to use t-mobile sim and would this work?
No, It only works with AT&T if you are in the USA.
You got the right stuff! Also your website loads up fast! Who are you hosting with? Please, pass me your affiliate link for your host? I wish my website is as quick as yours. I just thought that you might like to check green smoke, speed of my site.
I discovered your blog on Monday and started to observe your posts frequently. I’ve not commented on any weblog simply but but I used to be pondering I’d love to. It’s very thrilling to actually contribute to an article even if it is solely a blog. I actually don’t know precisely what to write other than I genuinely loved reading three of the posts. Good posts indeed. I positive will preserve visiting your blog weekly. I discovered quite a bit from you. Thanks a bunch!
Hello!
TinyUmbrella v5.10.06 doesn’t see my iPhone. What should I do? Is there any other possibility to find Firmware version out?
Thank you.
I own a problem in this kind of subject. If anyone will help me and then remember to contact us with the handle wypasciuch@harvard.edu. Many thanks and greatest regards
The blog is cool
This is a comment to the website owner. Does your website get very little visitors or not rank for keywords with Google? Well we can help! We can provide you with tens of thousands of backlinks to your site! This will help your rankings on Google and make your website more visible to your target audience. Take a look as I am sure you will be interested. http://www.linklegends.com
I have redsn0w and i used tiny umbrella and my iphone 2g is 3.1.3 so i got firmware as you suggested iphone1,1_3.1.3 and it wont download for me so can you send me another link?
Also i actually cant get into the iphone with my sim card in it so i was wondering will it work when ( if ) i jailbreak it ?
Help would be great…..
i cant get into the iphone because i bought it second hand and i dont have the original sim
just follow the instructions on the vid and it shud work
i fixed my 3g on 4.2.1 using redsn0w0.9.6rc16
An incredibly intriguing idea. Are you experiencing much more justifications? Develop, it’ll be an excellent website down the road
i cant seem to complete th last step ! cant find that logo to complete the firmware ???? help !
Fcking thanks!!!!!!!!!!!!
hi ,i need some help ,im running on iphone 3.1.3 and my screen goes black at the end for then 20 minutes
Hey I’m getting the same thing but my screen stays black. If you find something let me know.
what version u download?
It didnot work for me. I did all the correct steps. It did install the redSnow and Cydia but booted up in the end with the same error, need a valid SIM to activate. It never got to the screen after all the installs and booting up like shown in the video. what did I do wrong?
My firmware version is 4.2.1 on 3G phone.
I’m soooo frustrated, It didnot work for me. I did all the correct steps. It did install the redSnow and Cydia but booted up in the end with the same error, need a valid SIM to activate. It never got to the screen after all the installs and booting up like shown in the video. what did I do wrong?
My firmware version is 4.2.1 on 3G phone.
Please reply!
Use redsn0w 0.9.6 for iOS 4.2.1, then watch this video http://www.youtube.com/watch?v=hHkip546yns I hope you problem will be solved
But my Iphóne 3GS has firmvare 5.0.1 so when can I get Reds0w version for hakactivation.
Thank you!
bajo la aplicación y a la hora de instalarlo se produce error, lo baje varias veces y aún no me funcionó! que debo hacer? quiero reparar ya este iphone!
la de tinyumbrella
help please about 3.1.3
I have a 2g with 3.1.3 firmware and Redsnow is telling me that it’s unable to find my firmware 1,1_3.1.3 and it’s telling me unable to find firmware…please help
hi, i have the same problem, how did u fix it??? thanks
I have the same problem as well as darius and ellie? I dont get it.lol
hi,, have the same problem, what did y do???? thanks
Yea Man it works respect
Hmm its sarting hacktivate but its not displaying and not working on phone what shod i do ???
which redsn0w would i use if i have the iphone 3g firmware version 4.2.1
Hi everyone,
I go major problem with my iphone 3g 4.2.1 – i have done all stepts correctly and installation seems run without any problems, however my handset crash during the last reboot with apple logo on the screen. I left it for a while but nothing change I restared the the phone a few times but it always crash after silver logo apple appear on the screen. I have done a hacktivation once again but i still the same problem.
please help
Yehawww worked for me my man, thank you!
It works but its waiting for reboot for a long time
what shall i do???
I will test this with a new page I am building… I’ll use ONLY this method for the first week and see if it generates any traffic and post back.
Can i do this on a iphone 4s ?
Hey, I found an Iphone 4 in the street, passcode locked, i was able to restore to 5.0.1, but I can’t activate without a SIM card. This vid doesn’t work for iPhone 4 on 5.0.1. How can I hacktivate? please help
I followed all the steps as said, but i have no idea what firmware i need to download, so i randomally clicked one which supports iphone 3gs because i understand the comma part, but i have no idea for the rest. i can find it in my files but when i try and browse to get it up i cannot find it any where because of the file type.. i cannot change it either,. help please
Where can i find redsn0w for iPhone 3GS 5.0.1 ? ;(((
hi
when i connect my iphone 3G, Itunes show a msg that the simcard is not valid this iphone 3G have firmware : 4.2.1 and baseband version
05.15.04-66.4_M3S2
is possible that this wk again…
thks for u help
it works! Thank you so much! 🙂
mine isn’t working.. i mean it does everything it has to do, but the at the end it just stays the same… still need to “insert a valid SIM with no PIN lock to activate iPhone” please help.. i’m using ios 4.2.1 and redsn0w 0.9.6 what am i doing wrong?
also, mine goes into black page with MILLIONS of white letters scrolling up before the pineapple logo comes on the screen.. need help please.. :/
well what do you know… just made it work!! 😀
thanks a lot for this video!! you effin rock man!!
how do i downlod it !!!!????
i have iphone 3g unlocked. i tried to upgrade from 3.1.3 to 4.2.1 bt after update it says invalid sim? i m from india, what should i do? plz mail me at my email id
bikramrana47@gmail.com
or
bikramrana47@facebook.com
plz help
it works thanks
I have an iPhone 3gs, with firware version 4.3.5 and i downloaded the restore firmware 2,1_4.3.5 like it says but I dont know which redsnow version to use because I already used 3 different ones and it says unable to find. PLEASE HELP ME…. 🙁
Hi guys,
I have a Iphone 3g and downgraded it from 4.2.1 to 3.1.3. with tiny umbrella. After that i hacktivate it with 3.1.2 because 3.1.3 didn’t work and they say this was ok(redsn0w). The problem is that it can’t find a network it says “no service” What must i do?
please help!!
i already download all the firmware for 2g..nothing happens…please help
any other option rather than this…please
Verry helpful i tryed to my 2g iphone …and now i will try to my 3g iphone…:)
I Have 2g 5.1 and i don’t know what firmware to use could u help?
Yuppi my iphone has got any network,.. ios 4.2.1
firstly readshow help i unlock my iphone without sim card
than than install ultra snow for “network serching” or “no service” or for “carriers”
than randshow 9ra16 for ipad flash band and “yuppi network got”
i hardly given up to 3-4 hours including downloading on 512kbps broadband or it say 512/8.33 i.e. 60kbps around.
than you so much,… 🙂
can u help me with what firmware to update to jail break my i phone
Model number : MC603B/A – iPhone4
Baseline version: 04.12.01-ICE_2_13
Firmware version : 5.1
when i download firm ware nothing is working
sir. this hacktivation, does it works here in the Philippines? or the ultrasn0w works here? I finished jailbreaking it, but it doesn’t have a signal. help please… 🙁
I mean. if I’m done hacktivating the iPhone, will it pick up a signal in any services?
I just want to say thank you for the best tutorial on this subject.
Informative, well paced, extremely clear.
Simply superb. Thank you !
I have 4.3.5 i can’t find redsnow for it
why i cannot open tinyumbrella??i have java on my laptop.someone pls help me
man what is a jailbreak cable do i need it to jailbreak or to active the iphone without a sim? im a noob… sry
can someone pls heeeeeeeeeeelp me :S
Thanks for this tutorial it;s really help, more power
thank You so much, you helped me big time! ur epic!
i did the same thing as you did.but at the and my iphone turned down!!!
can you help me about this??
I have a iphone 3g 4.2.1, I have done all the steps and once it is done downloading it restarts itself but then it will go back to the same screen and not allow me to activate the iphone. Do i need a att sim to activate it. I am a tmobile user.
clicked deactivate and cydia and it showed exactly what was seen on the video once being downloaded.
any help would be great thanks.!
hey im running 4.3.5 on i phone 3gs mine is stuck on enter original sim wanna fix it now!!!!! what do i do can some one call me an help?
when i try to download the Redsn0w it wont let me for my iphone 4.2.1
i have cancer please donate to me ken@kennethstrong.com
I’ve only got a few minutes then I’m going out with my friends, but I simply wanted to tell anyone still struggling for an income, You’re almost at the finish line! It has been 3 months since I began and I’m finally stabilizing at roughly $80-$330 a day with http://earn-1100-weekly.info So it certainly works. Tip: begin with the video..
I have a iPhone 3Gs that is a 4.3.5 iOS and 05.16.02 firmware, I’m having a hard time figuring out how to get all the information so I can get the iPhone to work with using a T-Mobile sim card instead of a AT&T sim. If there is anyone out there that would be able to help me out, that would be great. Thanks
What redsnow is required for firmware 5.1.1? Help please?
Thank you very very much your solution worked! Very much appreciated 🙂
I did all the instructions but no network, I have the iPhone 3G – Installed Fireware on the phone is 4.1. What I have to do ?
So i jailbreak the phone but it cannot search for network. i have no signals. How will you guys take care of that and again thank you so much for your vide
hi,
thanks alot….how to unlock after doing…..i am sucessful up to hactivation…but later how to unlocke them for 5.1.1 and 4.12,01
please any one help me…..
hey there! so i was trying to download the redsn0w for my firmware version iphone 3g 4.2.1 and actually the link to download this redsn0w doesn’t even exist, so how can i finish my unlocking process without the redsn0w.
This really helped, spent sleepless nights just to make my iphone work, then i found your vids. I wanna hug you. <3
thanks i really works, i’m so happy i kiss u. *
Thunk you i M SO HAPPY
I cant find the redsn0w for my firmware version 4.2.1 helppppppppp 🙁
Help I have a 3G iPhone 16gb with 4.2.1, I downloaded redsn0w 0.8 and iPhone1,2_4.2.1_8C148_Restore.ipsw.
I get Unable to recognize specified IPSW…
Helo Please
same here bro. please help me find a redsn0w for my v.4.2.1 iphone3G
Dude, you ROCK! Thank you 1000’s!
wont let me enter DFU mode, ive tried about ten times< HELP!!!
how about is the pineapple icon doesnt show it only shows “downloading jailbreaker data”?
Dude I need Serious Help , I found an iphone 4 telling me , its unlocked , i dont know the firmware or carrier just that needs a sim card , and a internet conection to itunes how can i unlock it ?
thank you – this worked on my iphone running 4.2.1
Thanks men!! love u!! DUDE!!!
Hey guys i need your help 🙁
My iphone is 2g 2nd Gen and it was working well and has a latest version of 3.1.3when i decided to restore it’s previous version in itunes, and after restoring i can’t use my iphone anymore. It says that i need to use a valid simcard to activate the iphone. So i decide to jailbreak it, i downloaded the Redsnow 0.9.4 and the firmware 3.1.2, i did follow all the steps but i’m having a problem when my phone is in DFU Mode, the screen is all blank. And i can’t see the picture that says Downloading/Jailbreaking. What am going to do??
helow,u gat to send me ur email so dat u help me the more…i kant identfy da version for ma iphone bt its that type with a silver back-cover……i nid to unlock it…
Thanks for the help, but I have a small problem.
When I go on the website to download redsn0w for v4.2.1, the website won’t load.
It always says :”Page not found”.
Help pwease :3 ?
same here bro. if you get any sites please share it to me 🙁
Need help, i have java and downloaded tinyumbrella, i run it but it only runs up to the black box than goes…doesnt open up the white page….and i do have the latest java 7 installed wtf is wrong?
Need help,
i have java and downloaded tinyumbrella, i run it but it only runs up to the black box than goes…doesnt open up the white page….and i do have the latest java 7 installed wtf is wrong?
I cant seem to get tiny umbrella to open, yes i have java installed could i get some help
hellow,am running a 2g 3.1.3 and i downloaded iPhone1,1_3.1.3_7E18_Restore.ipsw bt its not workn.pliiiizzzzzzzzzzzzz some angel to come to ma rescue……pliiiiiziziziziziziziziziziziz…..
hey,, did u fix your problem?
Works perfectly, thanks a lot!
worked, thanks!!
Thanks you save me from brazil you have a friend
while doin jailbreak it stops at “waiting for reboot” and my iphone 2g screen gets white coloured and doesnt proceed further. please help. last time i had network problem it was totally lost.
I have a jaibroken iphone 4 from japan, ..
its deactivated.. because i tried installing SAM.. but it didnt work out..when i uninstalled it.. it got deactivated..
now..
should i jailbreak my phone again ? is it the right way ?
what if redsnow stop working?
It fin’lly worked! Thank God and Thank you! 🙂
hi, what redsnow should be used for iphone 4 os 5.1 Base4.12.01. thanks.
hi, i tried to download tiny umbrella on my pc and my mac but it downloads pc keeper and mac keeper what did i do wrong did i click the wrong but if u can can you show me in a video which button to click
plz dont feel bad or get mad but you hardly replyed
plss help me im stuck in emergency calls only because i try to upgrade my idevice (iphone 3g) to i os 5. plss tell me what to do. tnx
I did everything and its still not working.
What redsnow is required
bASEBAND 05.15.04
bootloader 6.2
Help please?
Model MB048
put it in DFU mode open itunes and restore and update
I did everything and its still not working.
i cant dowload redsnow 4.1 for windows , it doesnt let me even click on it
I have an iPhone 3G and i dont have a sim so I am trying to “Hacktivate” it but i can’t get redsn0w…. I got a version and it’s the right one, But it’s in a zip file, What do I do with it????? Please Help….
where did you got your version of redsn0w? is it v0.9.6.b4 (4.2.1, all devices) Windows?
OK, I managed to get the softwares… and i did all the stuff, but, it didn’t let me get into my iPhone…. 🙁
Its very helpful tutorial and its worked with my iphone 4 5.1.1
i used latest version of redsn0w. but its locked still and not accepting sim from other carriers.
Please suggest…
hi there i need to activate my iphone 3gs its on 5.1.1 version so which red snow should i use
you shouldn’t need tiny umbrella as the newest version of redsn0w will tell you what you phone is running, then you can go find the older version you need.
Tiny umbrella not showing my i phone at all so cant find details. Am a complete noob tbh. pls help
Wow! thanks so much.! it works..i saved a lot of money..thanks
You are the BEST!! Thank you! iphone 3G is Sorted: error 1051 fixed, downgraded to 3.1.3 and hacktivated. It took me forever to work everything out as 5 or 6 hours ago I knew NOTHING about iphones..or software! But I got there in the end, thanks in a big way you and your helpful (and reassuringly calm) videos 🙂 I’m so pleased! x
Awesome, thanks so much! Worked like a dream 🙂
ermehgerd i need help! i downloaded tinyumbrella ( current version) and i dont kknow what to do from there my iphone 3g wont come up as a connected device? PLEASE HELP
Whats the name of the software with the box you downloaded?
why does the icon Cydia is not appearing after i did this process..?
not working at all , at the end , when the reboot start , my iphone don’t open , it a black window. the reboot dont start either
same problem bro
please help us out people
same here.. :/
can u give me the jailbreak tabel
check
hey hw long does it takes to reboot ??????????? plzzzzzzzzz let me knw
My iphone stuck on downloading jailbreak deta.. what should i do..?
non funziona!!!!!!!!!!!!!
Guys, you are AMAZING 🙂 Thanks a lot, all worked perfectly!
Just one thing to keep in mind gor 3G users: If you are jailbreaking firmware 3.1.3, feed redsn0w firmware 3.1.2
Cheers!
Omg!!! already did evrything but something happened at last. When I wanted to get music in Itunes something apears like recovery something and dam* broke my 3GS now I can’t open it. The only thing I see is the apple mark and a loading bar that doesn’t load… :'(
NeeD HelP PLEASE! :/(//
can i restore this iphone 4 version is: 4.3.3 please ansfer me!
if my ifhone 2g is version 3.1.3 what firmwire can i used??? some tell me pliz
I bought a 3GS from a friend and was using iOS5 when I tried to upgrade it to iOS6 and realized it was unlocked. Now it just doesn’t activate when I try to restore it using iTunes.
I just downloaded TinyUmbrella but that too doesn’t work. It doesn’t show any SHSH.
Please help.
Thank You very much dude…. thanx a lot….
where can i download redsn0w v0.9.6.b4 (4.2.1, all devices) for Windows for my iphone 3G with a 4.2.1 version. the link above doesn’t work! :(( please help me by sending the link to my yahoomail thanks alot!
Hey thanks alot it really worked for me but pls how do i jailbreak my iphone 4s i tried it bt it didnt work
Tinyumbrella link not working!!!!!!!!!! helpp
Well I got an iPhone 3g running on 4.2.1 (firmware) and I click the “Browse Button” On Reds0w nd it says Select Your “IPSW” so i select (iPhone1,2_4.2.1_8C148_Restore) and it says Processing Firmware… then it says Unable To Recognize Specified IPSW /:
i have iphone 3gs
firmware 6.0gm
baseband 05.16.07-6.4_M3S2
iv’e looked through the firmwares and the redsnow but i can’t seem to find the right ones can anyone help me out please 🙂
has taken me a full week to figure out a 1015 error…used multiple sites and then finally these instructions to get the phone off emergency calls only….
thank you so so much
the link to download redsnow 4.2.1 doesn’t work says page not found please reply with a working link
Thannkk you so much thiss work
does not work with iOS 6. please tell me when this will be compatible with iOS 6
hi i get redsnov 0.9.15b3 i have 6.0.1 and ipgone 3gs with 6.15.00
when i try to enter IPSW i get mesage at my redsnow is wrong. with redsnow i must use? sory for my english
hi….
i did nt founnd the redsnow for my iphone running in ios 4.1..could u please tell me where do i find it?
would this work for Iphone 3gs using IOS 6.0.1? with redsnOw redsn0w_win_0.9.13dev4?
After it rebooted my iphone 4 it was still at the activation screen. please help
Hello I HAve An iPhone 3G With A Broken Home Button Is There A Way To Hacktavate It
i hve an iphone4
i updated to ios6.0.1 and it is now stuck in itunes saying no sim card..
my baseband is 4.12…
what should i do?? pls help
3G. no signal after hacktivate
I’m trying to Hacktivate an iPhone 2G with version 3.1.3. I DLed Redsnow 0.9.4, but it says “Unable to recognize specified IPSW”. I checked what version I have on my device with Tiny Umbrella and it said I had iPhone 3.1.3. Any help would be greatly appreciated!
hey….i wan say thank u…………but after i jailbreak it it asks me to insert a valid sim card and it doesn’t have cellular network can anyone help pls plssssssssss.
how to find the firmware of iphone 2 ver.3.1.3
i have the firmware 3.1 and i cant find the right redsnow for it can u help me
the firmwear is not working in my redsnow 0.9.6b4 for my iphone 3g
need for iphone 1
i just updated my iphone 3gs to ios 6 and now i am trying to activate it without a sim card how do i do that
you cant
Really helpful, Thanks a Lot !!!!
No luck downld any of the links on my laptop-ESET security keeps blocking it. Can’t determine version I have either. I want to say its a 3g , not a 3gs phone, so that might be why its fubar’d.
Any suggestions?
I will say though, your video was instructional, good job.
am on iphone 4 ios 4.3.5 fmwr 4.12.02
nothing works
all the process goes smoothly but still stuck at itunes icon
what am i missing?
Worked great and it’s now jailbroken, but I can’t get it to do anything with my T-mobile sim inserted and it doesn’t say t-mobile in the corner. Any suggestions? I just spent all day breaking it and I wanna use it!
hi!
i upgraded to 4.3.3 and my phone was locked.
then used your youtube- and it worked.
is there a way to get my contact list back?
why dosent my modem work now?
thanks!
THANK YOU THANK YOU THANK YOU THANK YOU SOOOO MUCH! <333333
I got stucked on “waiting for reboot”, what can I do??
It didn’t work, the phone is still not reading the sim! =( Please help!
Helpppp…it wont work instead of coming up with the pictures at the end it just has loads and loads of writing and then goes back to the emergency calls only screen!!! what do I do ??
i have an iphone 2g , i downloaded the redsnow 0.9.4 for firmware 3.1.3 and after downloading that redsnow cant read it what doi dowith the zipfile … extracting it helps nothing
What if I have an iphone 3g with firmware 4.2.1 , the tinyumbrella 6.1.1 is good ?
please I really need to activate my iphone :/ ?? help anybody plz?
Redsn0w error, stuck at exploiting limera1n
how do you create firmware?
i upgread to 6.1.2 and it goes update failed now here can display unlock screen and again i restore its give 1600 error what can i do plzzzzzzzzzzz help…:(
thanks it works, now i need to unlock my phone, how to do it?
SOLUTION!! I got this to work like this: before to start redsnow app you need to click right on mouse…compatibility..check windows xp sp3 and apply.I solve the problem with that.
plz help i have iphone 4s ios6.1.2 and redsnow dosen’t work what should i do plz help
I have I Phone 4 I have being using for a while. I tried resetting to factory settings and it went into factory unlock please help me to jailbreak. I am trying to find the right Redsnow version that will be compatible with firmware version. Phone details bellow:
Device Model – MC605FB/A – iPhone4
Firmware Version – 6.1.3
Baseband Version – 04.12.05-ICE_2_13
IMEI – 012431000978596
I like the valuable information you provide in your articles.
I will bookmark your weblog and check again here frequently.
I’m quite certain I will learn a lot of new stuff right here! Best of luck for the next!
My lock button is not working what should i do??
ummmm…it got stuck on waiting for reboot..what can i do?
i ve iphone 2g a1203 i am stuck at usb connect to itunes screen can anyone explain how to activate the phone aagain….thanks
thanx Dude..great stuff
hi can someone tell me how i must know wich firmware or redsnow i must use for my iphone 3gs i restored it with version 6.1.3
I am trying to unlock origional iphone with version
iPhone1,1_3.1.3_7E18_Restore
Its giving a message that this is not supported.
Please help.
After Hacktivating your phone if it shows no service install ultrasnow from cydia through wifi or manually……..Turn off the 3g and cell data option off and then turn the phone off, turn it back on and then off again , Signals will come 🙂
Hey I tried it many Times but it Stucks every Time at an Apple Logo and a Stuck spinnig weel